Wedge Wire DSM Sieve Bend Curved Screens Panel For Dewatering Applications
Category: Sieve Bend Screen
Material: stainless steel 304,304L,316,316L,321,430 or as per your request.
Properties: sieve bend screen
Application: water-treatment,beer brewing,water well drilling ,oil well drilling ,mineral processing, coal-cleaning plant, refining & petrochemical
Details of Wedge Wire DSM Sieve Bend Curved Screens Panel For Dewatering Applications
Wedge Wire DSM Sieve Bend Curved Screens Panel is also known as a parabolic, arc screen etc. Wedge Wire DSM Sieve Bend Curved Screens Panels are ideal for sizing and dewatering applications to remove solids from liquids, or in solid/solid separation for dry feed situations.
The Wedge Wire DSM Sieve Bend Curved Screens Panels are made of V-shape wire or wedge shape wire around an internal array of longitudinal support rods. Each jointpoint of these wire is fusion welded, the V or wedge shaped profile wire wraps around the support rods over the full length of the screen creating a continuous slot opening. Therefore the screen allows wate
Usages of Wedge Wire DSM Sieve Bend Curved Screens Panel For Dewatering Applications
1) Widely used in vairous kinds of medium filtering
2) As the fitting using in the water-treating equipment;the environment protection; the sea water transforms into the industrial water and life use water desalination treatment; running water treatment; softening treatment;
3) The petroleum industry: the petroleum product terminal filters and the chemical acid; the alkali liquid filters, the ethyl alcohol;
4) The organic solution recycling filter
Features of Wedge Wire DSM Sieve Bend Curved Screens Panel For Dewatering Applications
1. flatness to within tight tolerances
2. no weakening of the welds, because of flattening (and no stress corrosion problems as a result)
3. accurate distance between support profiles
4. possibility of different support wires in one screen
5. possibility of variable spacing between support wires in one screen
Customizable of Wedge Wire DSM Sieve Bend Curved Screens Panel For Dewatering Application
According to your requirements, we can process and manufacture various shapes of sieve plates.
Wedge Wire Sieve Bend Panelconsists of a concave curved profile wire screen mounted in a frame with the screen openings perpendicular to the flow. A curved screen has greater capacity than a flat screen due to forces exerted as material flows against the curved surface.
Slot: form 0.1mm, tolerances: ± 0.05mm.
Maximum size: 3000mm x 4000mm.
Material: Low Carbon, Low Carbon Galvanized steel (LCG), Stainless Steel ( 304, 304L, 316, 316L, etc).
Various applications including:
Food processing
Pulp and paper processing
Rubbish removal from water
Water intakes
Coal preparation
Gold recovery
Wedge Wire Specification:
| PROFILE WIRE |
|
|
|
|
|
|
|
|
| WIDTH(mm) |
1.50 |
1.50 |
2.30 |
2.30 |
1.80 |
3.00 |
3.70 |
3.30 |
| HEIGHT(mm) |
2.20 |
2.50 |
2.70 |
3.60 |
4.30 |
4.70 |
5.60 |
6.30 |
| SUPPORT ROD |
|
|
|
|
|
ROUND |
| WIDTH(mm) |
2.30 |
2.30 |
3.00 |
3.70 |
3.30 |
Ø2.5--Ø5mm |
| HEIGHT(mm) |
2.70 |
3.60 |
4.70 |
5.60 |
6.30 |
---- |
---------------------------------------------------------------------------------------------------------------
Our factory Xinlu Wire Mesh product co., Ltd located in Anping country, Hebei Province, China.
Our mainly products are: stainless steel vee sharped wire / wrap wire, johnson type screeen, water well screen / rod based wire wrapped screen, wedge wire screen, reverse wedge wire screen, stainless steel strainer pipe, v wire slot tube, perfect roundness well screen pipe, dewatering well screen, dewatering screen panel, wedge wire grating, v wire flat panel, screen nozzle, water and gas strainer nozzle, stainless steel filter nozzle, wedge wire support grids, sieve bend plate, v wire screens, ARC screen, filter bottom nozzle, stainless steel lateral screens, wedge wire filter candles, Rotary drum screens, strainer cylinder, sand control well screen, oil well screen, rod based continuous slot screens, header and hub laterals & hub radial laterals etc.
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: 3-5 days for Sample preparing , 15-25 working days for mass production.
Q3. Do you have any MOQ limit for the order?
A: Low MOQ, 3pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: Airline, sea shipping and rail transportation are all optional.
Or ship by EMS, DHL, UPS, FedEx or TNT, it takes 5-7 days to arrive.
Q5. How to proceed an order?
A: Firstly let us know your need specification or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production.
Your message must be between 20-3,000 characters!
