|
Product Details:
|
| Other Name: | V Wire Water Well Screen Pipe, Johnson Wedge Wire Screen Pipe, V Wire Water Well Screen Pipe, Deep Water Well Screen Tube | Feature: | Non-clogging, Non-magnetic, Rust Resistant, High Pressure, Easy Installation |
|---|---|---|---|
| Application: | Sand Control, Motor Filter, Pump Filter, Water Well Drilling, Wastewater | Material: | Stainless Steel 304, 304L, 321, 316, 316L,, LCG,etc |
| End Connection: | Welded Rings, Threaded Male & Female Coupling, Flange | Flow Type: | FOTI |
| Weight: | 25-30kg/m2 | Size: | 2-20" |
| High Light: | Non Clogging Water Well Screen Pipe,Sand Control Water Well Screen Pipe,FOTI Wedge Wire Screen Pipe |
||
Non-Clogging Johnson Water Well Screen Pipe With High Pressure Resistance For Sand Control
Water Well Screen Pipe for Sand Control
Screen slot design is a crucial aspect in the efficiency of production wells. Precise slot control starts with precise slot forming. Because of that, Xinlu wedge wire screen pipe is constructed by helically winding a continuous triangular shaped wire around a series of vertical support rods, ensuring the final screen slot will meets our strict quality standards.
Sand control is another crucial aspect in well management. Excess sand in pipes leads to premature pumping equipment failure. Thanks to a unique slot design, sand has a smaller chance of entering through the screen, which leads to a smaller chance of clogging or abrasions. With the wedge wire screen, a larger amount of water can easily enter the well pipe, which means increase in well productivity. Due to these factors, Feiya group branch factory-Xinlu’s water well screens are widely used in well completion, geothermal well construction, and remedial construction work.
Benefits of the Wedge Wire Screen Pipe
1. Maximum Flow Rate
The slots are arranged in a uniform pattern, allowing water to enter the screen directly from all directions of the water bearing area.
2. Excellent Sand Control Performance
Traditional perforated tubes have holes large than 1 cm, which do not keep sand out. Scratches and corrosion on the outer wrap layers leads to more sand, gravel and clay entering the well pipe, which in turn leads to clogging. However, the wedge wire screen has slot openings between 0.5mm and 1.5mm, keeping most sand and abrasive particles out.
3. Long Well Life
Each wedge wire screen undergoes anti-corrosion treatments, rendering it less prone to rust or encrustation.
4. Easy Installation
Wedge wire screens are lighter than cast iron pipes or perforated tubes, making them easier to install.
5. Standard Length
The standard length of each wedge wire screen is 3.2m. Pup joints can be added upon request.
6. Connection Method
Welded, threaded, and flanged connections are available.
Applications for the Wedge Wire Screen Pipe
This screen is applicable in vertical wells, deviated wells, directional wells, and others that require sand control.
Water Well Screen Pipe Specification list:
| Size (Inch) |
O.D (mm) |
Slot (Inch) |
Length (Ft) |
Collapse Strength (PSI) |
Tensile Weight (ton) |
Wire size (mm) |
Support Rods (mm) |
| 4-1/2 | 114.3 | 0.040 | 10 | 395 | 6 | 2.2*3.5 | 3.0mm/22 |
| 4-3/4 | 120.6 | 0.040 | 10 | 395 | 6 | 2.3*3.5 | 3.8mm/22 |
| 6-5/8 | 168.3 | 0.040 | 10 | 252 | 8 | 2.3*3.5 | 3.8mm/32 |
| 8-5/8 | 219.1 | 0.010 | 10 | 399 | 10.5 | 3.0*4.6 | 3.8mm/48 |
| 8-5/8 | 219.1 | 0.020 | 10 | 370 | 10.5 | 3.0*4.6 | 3.8mm/48 |
| 8-5/8 | 219.1 | 0.040 | 10 | 323 | 10.5 | 3.0*5.0 | 3.8mm/48 |
| 10-3/4 | 273.1 | 0.010 | 10 | 206 | 11 | 3.0*5.0 | 3.8mm/55 |
| 10-3/4 | 273.1 | 0.020 | 10 | 191 | 11 | 3.0*5.0 | 3.9mm/55 |
| 10-3/4 | 273.1 | 0.040 | 10 | 167 | 11 | 3.0*5.0 | 4.0mm/60 |
Water Well Screen Pipe Sizes:
Diameter: 2-1/2", 3", 4-1/2", 4-3/4", 6-5/8", 8-5/8", 10-3/4", 12-3/4", 14", 16",18", 20"
Material: Low Carbon, Low Carbon Galvanized steel (LCG),Stainless Steel( 304,etc.), Duplex Stainless Steel, 904L etc.
Length: 2.9m or 5.8m to fit container, up to 6 meters.
Slot: 0.1mm, 0.2mm, 0.3mm, 0.4mm,0.5mm, 0.63mm, 0.75mm, 1.0mm, 1.5mm in usual, also can be others.
End Connection: Plain beveled ends for butt welding, male/female threaded,Flange, Closed Up etc.
Other materials available upon request.
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: 3-5 days for Sample preparing , 15-25 working days for mass production.
Q3. Do you have any MOQ limit for the order?
A: Low MOQ, 3pcs for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: Airline, sea shipping and rail transportation are all optional.
Or ship by EMS, DHL, UPS, FedEx or TNT, it takes 5-7 days to arrive.
Q5. How to proceed an order?
A: Firstly let us know your need specification or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production.
Contact Person: Mrs. Star Lee
Tel: 86-133 1586 7171
Fax: 86-318-7984-958
