25mm Diameter Pure Round Non - Angular Screen Tube In Foundry Process

25mm Diameter Pure Round Non-Angular Johnson Stainless Steel Screen Tube Application In Foundry Process

wedge wire screens, v shaped wire welded stainless steel water well screens, low carbon galvanized water well screen, Johnson screen tube, johnson screen pipe, johnson well screen, johnson wire screen, johnson filter screen, johnson v wire screens,v wire slot tube, wire wrapped screen pipe, oil well screens, dewatering well screen, perfect roundness screen tube, profile wire screen pipe, reverse rolled screen tube, spiral screen tube, screen cylinders, rod based continous slot screens, sand conrol well screen, wire wound screen pipe, stainless steel filter elements, wedge wire roll screen, stainless steel strainer pipe,

Pure Round Stainless Steel Screen Tube Characteristic:

1.  Easy to leak, wear and corrosion resistance.

2. The cross section of the mesh is trapezoidal. The gap is narrow at the top and wide at the bottom.

3. It is a screen bar made of cold-rolled stainless steel wire. The support bar is welded by automatic mine screen production equipment. The screen seam is uniform, the welding quality is stable, the opening rate is high, the service life is long, and the strength is high. Rigidity and bearing capacity can be made into rigid screening and filtering devices of various shapes.

Pure Round Stainless Steel Screen Tube Application:

The product is especially suitable for waxy oil, asphalt, diesel, beer, and high viscosity oil.

It is widely used in electric power industry, natural gas well, petrochemical industry,chemical industry, mining, paper making, environmental protection, metallurgy, food, sand control, Coarse filtration and fine filtration engineering for water treatment.

Customer Service: Custom well screens

Inform us of your specifications for the water well screen, including diameter, slot opening size, length and percentage of open area. Based on that information, we can customized your products.

Main specs for Pure Round Stainless Steel Screen Tube

Well Screen material: stainless steel, galvanized low-carbon steel, or custom materials

Slot opening size: 0.03mm-15mm

Diameter (inches): 1, 2, 3, 4, 5, 6, 8, 10mm

Length: 0.5m, 1m, 1.5m, 2m, The maximum length is 2m

Connection method: beveled, circumferential welded, threaded connection

Perfect Roundness Wedge Wire Screen Pipe Specification

​

Remarkes

1. Make Tubes with different material according to user requirements

2. Slot should be bigger than 0.025mm and less than 2500mm long, OD should be smaller than 220mm

Type of profile wire and support wire

• Profile Wire of Perfect Roundness Wedge Wire Screen Pipe

​

• Support Wire of Perfect Roundness Water Well Screen Pipe

Benefits of Wedge Wire Wound Johnson Tube Well Screen In Water Well Construction

1. Maximum Flow Rate

The slots are arranged in a uniform pattern, allowing water to enter the screen directly from all directions of the water bearing area.

2. Excellent Sand Control Performance

Traditional perforated tubes have holes large than 1 cm, which do not keep sand out. Scratches and corrosion on the outer wrap layers leads to more sand, gravel and clay entering the well pipe, which in turn leads to clogging. However, the wedge wire screen has slot openings between 0.5mm and 1.5mm, keeping most sand and abrasive particles out.

3. Long Well Life

Each wedge wire screen undergoes anti-corrosion treatments, rendering it less prone to rust or encrustation.

4. Easy Installation

Wedge wire screens are lighter than cast iron pipes or perforated tubes, making them easier to install.

5. Standard Length

The standard length of each wedge wire screen is 3.2m. Pup joints can be added upon request.

6. Connection Method

Welded, threaded, and flanged connections are available.

Applications for the Wedge Wire Screen

This screen is applicable in vertical wells, deviated wells, directional wells, and others that require sand control.

FAQ

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A: 3-5 days for Sample preparing , 15-25 working days for mass production.

Q3. Do you have any MOQ limit for the order?

A: Low MOQ, 3pc for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?

A: Airline, sea shipping and rail transportation are all optional.

Or ship by EMS, DHL, UPS, FedEx or TNT, it takes 5-7 days to arrive.

Q5. How to proceed an order?

A: Firstly let us know your need specification or application.

Secondly We quote according to your requirements or our suggestions.

Thirdly customer confirms and places deposit for formal order.

Fourthly We arrange the production.

Q6. Is it OK to print my logo on the product?

A: Yes. Please inform us formally before our production.